Air Source Heat Pump Central Heating Project With Radiator Heating System
Project Introduction
Location: Hebeiprovince
Building area: 20000M2
System design: ultra low temperature air source heat pump+radiator
Quantity of air-source heat pump: 13 set
The project is located in Hebei Province, with a heating area of about 20,000 m2. The project is a non-energy-saving building and distributed in the mountains. The climate is very harsh. The air source heat pump is used to replace the coal-fired boiler heating. Due to the vast area, the economy, construction schedule and heating effect are combined. The project adopts distributed heat pump central heating mode, and designs 10 heat stations in total. The office building area is the largest heat station. 13 sets of air-source heat pump Model SDNA-075Y are connected in parallel for intelligent control. It is officially put into use in 2017 to achieve indoor heating. In the entire heating season,the indoor temperature reach customers' requirements, the machine is stable, reliable and efficient operation, according to the average coal burned by the users, the air source heat pump heating systems can save about 434 tons of raw coal, reduce SO2 by about 7.4 tons, reduce CO2 by about 46 tons, and reduce ash and slag emissions by about 130 Ton per year.
Air source heat pump in this project Parameter
| Model |
SDNA-075Ycode name.pdf |
| Compressor capacity |
25HP |
| Function |
Heat |
| Electricity |
380V 3N-50Hz |
| Working conditions |
℃ |
-25~+45 |
| Data |
Heata |
Nominal capacity |
KW |
44.5 |
| Input power |
KW |
18.3 |
| COP |
/ |
2.4 |
| Heating IPLV(H) |
2.7 |
| A7W35c |
KW/COP |
75.0/4.2 |
| A2W35 |
KW/COP |
62.5/3.20 |
| A-7W35 |
KW/COP |
52.5/3.0 |
| A-15W55 |
KW/COP |
45.5 /1.97 |
| A-20W45 |
KW/COP |
37.4/2.04 |
| Max. running currency |
A |
56 |
| Compressor quantity |
set |
2 |
| Refrigerant/charging quantity kg |
/ |
R22/10*2 |
| Air blow type |
/ |
Top |
| Water pipe diameter |
mm |
50 |
| Rating flow |
m³/h |
12.6 |
| Water side pressure loss |
kPa |
≤45 |
| Noise level |
dB(A) |
62 |
| Overall dimensions(L×W×H) |
mm |
2100×1100×2080 |
| Weight |
kg |
730 |
a: Nominal heating conditions: ambient dry bulb temperature-12℃, wet bulb temperature-14℃, outlet water temperature 41℃, water flow 0.172 * nominal heating capacity
A7W35 working condition: inlet air temperature 7℃, outlet water temperature 35℃
Yushen Products Advantages
- Environmental-friendly, even in -25C can work in high COP
- Fan of heat exchanger is big diameter Jagged type, which increase the air flow tangent length when air going through fans, reduce noise; When the air volume is increased, the heat exchanger is more evenly.
- Multi- Multi-throttle channel design is accurate.
Multiple energy-saving devices in a single system, precise control of refrigerant flow, enabling the unit to maximize heat/cooling capacity and maximum energy efficiency in various working environments, reducing operating costs
- The water side shell and tube heat exchanger has high efficiency and reliability.
The industry's leading refrigerant distribution technology can effectively improve the uniformity of gas-liquid two-phase fluid distribution into heat transfer tubes, improve the utilization of heat exchange tubes, and achieve efficient heat transfer.
- Large-area hydrophilic aluminum heat exchangers increase the heat production.
The four-row tube V-shaped arrangement has high heat exchange efficiency and uniform wind speed distribution.
It adopts 9.52*0.35 internal thread high-efficiency heat exchange copper tube and 3.1mm large-format hydrophilic aluminum fins with better hydrophobicity; it improves the operating efficiency during frosting and reduces the number of defrosting.
The optimized long flow path design and wide expansion of the expansion throttle ensure uniform distribution of refrigerant in low temperature environments. Ensure even frosting, complete defrosting, strong heating and efficient operation
Product Tags:
|
|
Stable Heat Pump Heating And Cooling System - 25 To 45 ℃ Working Conditions Images
|
